Skip to main content

KiCad Basics Teil 1. Samstag 04.06.22

Teil 1. Platine Herstellen

Steve Mayze

 

Objective

The creation of projects in electronics requires the connection of various components to build a circuit. There are various means to achieve this - breadboard, verro-board. However there are many advantages to building an own Printed Circuit Board (PCB). The purpose of this workshop was to introduce the attendees to the KiCad electronic design tool so that they will gain the know-how and confidence to create their own PCBs. 

There were two goals for the event.

  1. Introduce the attendees the work-steps required to create a PCB. This workflow is not unique to KiCad.
  2. Have a set of design files ready to send for fabrication.

Method

A relatively simple (but not too simple - Falstad model) project was presented. The classic first project, a blinking LED project. The project was presented as our final goal that we needed to implement as a PCB.

Screenshot 2022-06-07 at 17.33.16.png

There was quite a bit of information to get through. 

  1. Creating a project.
  2. Creating a schematic.
  3. Creating and modifying the symbols for a schematic.
  4. Assigning footprints to the symbols.
  5. Creating and modifying the footprints.
  6. Creating the layout.

Procedure

I opened the session with the question of why do we ant to create our own PCB? The answers that came back were consistent to what drew me into this area of electronic development.

  • DIY home automation.
  • Neatening up existing projects.
  • Wanting to interface neatly with existing development boards.
  • Create my own development board.

I showed my won example of neatening up a project. Where I presented a first attempt at creating my won door bell extension with what I knew at the time and using Verro board.

Old New
TheOldDevice.png IMG_0860E.JPG

 

We then started work. I introduced the software and the creation of the schematic diagram with an introduction to the symbol library and how you go about creating a new symbol or changing an existing one to suite the purpose of the diagram. It soon came apparent that a symbol does not need to exactly match the physical component that is going to be used in the circuit. The schematic is a design document to help the developer and other understand the operation of a circuit.

image0.png

After lunch we moved onto the PCB Layout itself. Ideally the purpose of the class. I showed how to prepare the schematic for import into the PCB layout tool. The most important aspect being the footprints. A footprint is the physical form the component will take on the PCB. Each symbol must be associated to a footprint before the layout can be completed. The problem here is that for one symbol there could be any number of footprints to choose from. We need to consult the datasheet for the exact component we intend to purchase to ensure that out components will actually fit on our board and will be connect up correctly. This step should never be underestimated.

Another aspect of the layout I explained wat that we need to understand the design limitations and tolerances of the PCB fabrication house. Each house will have their own set of rules and we need to configure KiCad to help us adhere to those rules. This means we need to set up the minimum distances and widths allowed for the copper.

There is the question if this was a PCB creation workshop, how come we are preparing the design files to send off for fabrication? The answer is that the actual fabrication of the physical PCB is only one part of the process and actually not a significant part of the overall creative process of creating the design, assembling and troubleshooting. There is more than one technique for creating a PCB and ZAM does not yet have the facilities for either of these processes. Sending the boards off for fabrication is the simplest and most effective way to introduce the more important aspects of the creative process.

So at the end of the session, we now have some design files that can be sent off and on their return we will continue with the second part - the assembly and testing of the boards.

 

KiCad_Board.png

 

Things Learned and Improvements

This was the first KiCad workshop both for me and ZAM. In the planning it was important to me to make sure explain the design process workflow and highlight that at every stage of the process, we need to make design decisions. I consider this aspect is actually more important than the PCB software itself. However, I noticed there could have been a couple of tings done differently.

1. A Simpler project.
While the project itself seemed to be simple, and easy to explain, especially with Falstad Circuit, I tend to think now for a basic KiCad introduction, the concepts of symbol and footprint library management including symbol and footprint creation could be left off for a separate workshop.

2. Break the workshop up
While it was nice to have the full day to concentrate on the project, it was a long day and in the end the design files were not ready and had to be handed in a couple of days later. In thinking about point 1. above, with a simpler project, the workshop could be broken up into shorter, 2 hour, sessions that could be scheduled during an evening rather that taking up a whole day on the weekend. These session could then focus on specific aspects like.

  1. Schematic Creation
  2. PCB Layout
  3. Library Management
  4. Managing a PCB project with GIT
  5. Adding graphics to a PCB
  6. Custom and Fun board shapes
  7. Artistic PCB i.e. Creating Blinking Badges